Pure Sequencer

Pure Sequencer


SKU: N/A Category:


The GMSN! Pure Sequencer is used for creating melodies, hooks and riffs. The 8 sliders set the note to be played, which can be played in turn, randomly or pendulum (forward, then reverse, then forward, etc). Each step also has a gate out, which could be used to trigger drums or notes on specific beats.

The module can be in run mode, or in pause. In pause mode each step can be selected and adjusted. There is also control over the speed, which can also be controlled by an external CV clock, and a slew control. The range of the sliders can be selected to either 2 or 8 octaves.

Open Source Documentation
Eagle Schematic: Pure-Sequencer.sch
Eagle PCB: Pure-Sequencer.brd
Eagle Panel: Pure-Sequence-PCB-Panel.brd
Arduino Code: PureSequencerv2.1
Cadlab.io Schematic: Pure-Sequencer.sch
Cadlab.io PCB: Pure-Sequencer.brd
Bill of Materials: Pure_Seq_SMD_V2_2-BOM-20161009.xlsx
Further build documentation and guidance is provided to GMSN! Supporters via the forum. Please buy direct from GMSN! to create a forum account.

Additional information






20mA -12V, 50mA +12V