This beautiful eurorack case allows you to keep your modular synthesiser rig fully patched on the move and fully accessible during performance. The sloped edge of the case allows full access from the front, while the removable lid enables a multitude of combinations. Each side can either lay flat when space allows, or can stand on it's side when space is a premium, such as in the studio.
Both sides of the case are the same depth and allow modules up to 50mm deep over the power strip and 70mm elsewhere. The power strip sits below the middle 265mm of the rails. The lid and base each have a 4HP panel with a on/off switch and a 2.1mm DC power connector for the wall wart. Two 15V 4.33A wall warts with international AC plugs are included.
The 84HP version comes with threaded rods, while the 104HP comes with 84HP of threaded rod, and extra sliding nuts for those awkward to fit panels.
With just over 1.6A combined per 3U, giving a total of 6.6A over +/-12V and 5V, there is more than enough power for even the most hungry eurorack modules, with full over and under voltage and current protection.
Dimensions: Max module depth: 70mm (50mm over Power Strip) Length: 104HP - 555mm; 84HP - 464mm Width: 215mm Height: 285mm Weight: 6.4kg